Pallet has become an indispensable and important instrument in modern logistics system, which is widely used all over the world. With the development of national economy, especially China's accession to the WTO, the freight transportation is increasing, and the demand for molded pallets is also growing. In the past, most pallets used solid wood as raw materials to meet the needs of the pallet market. However, with the decrease of forest resources, more and more attention has been paid to making full use of small-diameter wood, wood processing residues and wood fiber materials. In order to improve the utilization rate of wood and wood fiber materials, wood molded particleboard trays have been developed in Germany and the United States one after another.

模壓工業托盤是刨花模壓制品中重要的一類，主要用于碼頭、貨場、倉庫、車間、等地搬運、貯存貨物，它與貨物形成一個移動單元或搬運單元，與叉車、搬運車、起重機等配合作用。工業托盤一般規格為400 mm ~600 mm，600mm~800mm, 800mm~1000mm，1000mm~1200mm，1100mm~1100mm。動態承載能力從250kg~1500kg，托盤自重10kg~20kg，托盤的弧形邊緣、槽形梁和巧妙的的加強筋設計，使得載重系數高達80（動載）。刨花模壓工業托盤為異形，等強度薄殼構件，自重輕，強度大，其承載量與自重比（載重量）高達60~80（動載）和200~300（靜載）

Moulded industrial pallet is an important kind of particlemolded products. It is mainly used for handling and storing goods in docks, freight yards, warehouses, workshops, shopping malls and other places. It forms a moving unit or handling unit with the goods and cooperates with forklifts, trucks, cranes and so on. The general specifications of industrial pallets are 400 mm ~ 600 mm, 600 mm ~ 800 mm, 800 mm ~ 1000 mm, 1000 mm ~ 1200 mm and 1100 mm ~ 1100 mm. The dynamic bearing capacity ranges from 250kg to 1500kg, and the dead weight of the pallet ranges from 10kg to 20kg. The arc-shaped edge of the pallet, the trough beam and the ingenious and perfect stiffener design make the load factor as high as 80 (dynamic load). The particlemolded industrial pallet is a special-shaped, equal strength thin shell component with light weight and high strength. Its load-bearing capacity to weight ratio (load) is as high as 60 ~ 80 (dynamic load) and 200 ~ 300 (static load)

模壓托盤

presswood pallet 

1.分類

1. Classification

創花模壓托盤按其結構可分為深腿和淺腿、雙面和單面；按裝卸方式可分為叉運和吊裝兩類。

According to its structure, the tray can be divided into deep leg and shallow leg, double side and single side; According to the loading and unloading methods, it can be divided into fork transportation and hoisting.

2.規格

2. Specifications

根據創花模壓托盤承重量的不同 ，平板部分厚度一般為8 mm、9 mm支, 腿有4 個、6 個、9 個。支腿可為圓形、方形、長方形，有一定錐度，中空， 壁厚一般為 10 mm左右。產品已規格化系列化。

According to the weight of the tray, the thickness of the plate is generally 8 mm and 9 mm, and there are 4, 6 and 9 legs. Legs can be round, square, rectangular, with a certain taper, hollow, wall thickness is generally about 10 mm. The products have been standardized and serialized.

創花模壓托盤的優點是：自重輕，強度高，尺寸精確，形狀穩定，無 金屬連接件，不會損壞貨物或包裝；根據使用要求選用不同膠粘劑和添加劑，可得到耐水、阻燃、防腐，一次性使用或重復使用等不同性能的托盤。

The advantages of the tray are: light weight, high strength, accurate size, stable shape, no metal connector, no damage to goods or packaging; According to the requirements of using different adhesives and additives, we can get water-resistant, flame-retardant, anti-corrosion, disposable or reusable pallets.